The heart of your toilet’s functionality lies in the fill valve and the float. When either of these components isn’t doing its job, water may continuously flow. Here’s how to figure out ...

Then, flush to see if it is working again. If it turns out to be broken, replace the valve. One of the most common reasons for low toilet water is a clogged toilet, which causes an overflow of the ...

And usually, only one of them will make noise as the toilet tank becomes full. That’s the ball cock, or water inlet valve. This valve is operated by the “wire” and “ball” mentioned in ...

you should shut off your toilet’s water supply. Find the pipe going into the wall behind the toilet and turn the valve off. Then, you won’t have to worry about getting too wet while you work.

If water is running down this tube, your toilet is overfilling. The cause is either the fill valve or the float connected to the valve. If the overflow tube looks OK, the cause is either the ...

Replacing the flush valve is a chore, as it involves removing the tank from the bowl. So, you will need to turn off the water to the toilet, disconnect the supply line to the fill valve and drain ...

For older toilets that don’t have a built-in shut-off valve, they will need to shut off the main water supply to the house. Luckily for homeowners, shutting down the water supply to your toilet ...

If water shoots out of your faucets, have the pressure checked and adjusted to about 50 pounds per square inch. You should also make sure the shutoff valve in the supply line under the toilet tank ...

You can reduce how quickly the toilet uses water by simply closing the supply valve slightly. This means the toilet will take longer to fill, but will reduce the temperature fluctuation in the shower.