A toilet fill valve is a component located inside the toilet tank that regulates the flow of water coming into the tank from your water supply. Every time you flush the toilet, the fill valve ...

The heart of your toilet’s functionality lies in the fill valve and the float. When either of these components isn’t doing its job, water may continuously flow. Here’s how to figure out ...

For older toilets that don’t have a built-in shut-off valve, they will need to shut off the main water supply to the house. Luckily for homeowners, shutting down the water supply to your toilet ...

Then, flush to see if it is working again. If it turns out to be broken, replace the valve. One of the most common reasons for low toilet water is a clogged toilet, which causes an overflow of the ...

you should shut off your toilet’s water supply. Find the pipe going into the wall behind the toilet and turn the valve off. Then, you won’t have to worry about getting too wet while you work.

Replacing the flush valve is a chore, as it involves removing the tank from the bowl. So, you will need to turn off the water to the toilet, disconnect the supply line to the fill valve and drain ...

The float, the flapper, or the fill valve are the most likely causes of a toilet running continuously. You can perform easy tests like monitoring water movement to help identify the cause.

the rubber flapper (also called a flat valve) raises inside the toilet tank. This allows the water from the tank to empty into the bowl and push the waste down the toilet. As the water moves from ...

Lift the flapper valve so some water flows into the toilet bowl. If the water goes back down on its own, you won’t have to do anything else. Otherwise, you’ll have to get plunging. You’ll ...

To rate each toilet, Consumer Reports’ test engineers ... As their name implies, these toilets have a flush valve that relies on gravity. Water drops from the tank into the bowl to move waste ...