Hold a small bucket to catch water as it leaks out from disconnecting the toilet tank supply line. Remove the fill valve lock nut Remove the lock nut from the shank of the fill valve right above ...

Flush the toilet to empty as much water as possible, then use a sponge or towel to soak up the remainder. Remove the old fill valve: Unscrew the water supply line and loosen the lock nut holding ...

When your toilet is ... any remaining water out of the tank. The old fill valve is the vertical post with a float attached to it. Use a wrench or channel lock pliers on the nut on the outside ...

Q:I'd like to understand just how water comes into the toilet tank ... unscrewing the nut attaching the fill valve, removing the old valve and replacing it with the new one.

The float, the flapper, or the fill valve are the most likely causes of a toilet ... the water supply hose to the bottom of your tank by positioning it and then tightening the lock nut on the ...

Before diagnosing and repairing your running toilet ... water overflowing into the overflow tube or a leaking fill valve. If the handle is stuck, use an adjustable wrench to loosen the handle nut ...

Your toilet is always there ... under the tank to disconnect the water supply line from the fill valve. You might need pliers for this. Then, loosen the nut that locks the valve to the toilet ...

Replacing the flush valve is a chore, as it involves removing the tank from the bowl. So, you will need to turn off the water to the toilet, disconnect the supply line to the fill valve and drain ...

Odd toilet noises have a number of causes—from water-flow issues caused ... followed by the plastic nut that’s securing the fill valve. Pull the old fill valve out. Use it to set the height ...

This allows the water from the tank to empty into the bowl and push the waste down the toilet ... the lock nut with a pair of pliers. You should then be able to pull the old fill valve up and ...