TI's RES60A-Q1 eliminates the need for lengthy discrete resistor chains with a single-chip, 1.4-kV, resistor divider that ...

The modder shows in the video that after tweaking through voltages and adding his own 1K resistors between the microcontroller and link port, also designed a PCB for the TI-32 project that makes ...

The output voltage is determined using this formula: So as it is clear when R5 is 1K, the maximum output voltage is somewhere ... In the last revision, I added two parallel resistors as a preliminary ...

If you have a simpler circuit, please comment below. The 1k resistors R10, 11 and 13 are not there to improve indicator circuit function but to inhibit transients that might otherwise gain access to ...

WASHINGTON — Comedian Adam Carolla urged college students to be more tolerant of controversial speakers on campus — just like he stomached a Taylor Swift song while shopping at Home Depot.

For example, if all the resistors were actually 1K except for one that was 5% low ... manufacturers sort out precise values for higher tolerances; in a batch of 5% resistors, none are likely ...

Raspbian Linux. HC-SR04 ultrasonic sensor. Five feet of Cat5 wire (four 24AWG strands needed). Two resistors (one 470R Ohm and one 1K Ohm). Heat-shrink tubing to protect soldered connections. Plastic ...

Megan Treacy is a writer from Austin, TX. A former editor at EcoGeek, she worked as a technology columnist for Treehugger from 2012 to 2018. The power cell is your flashlight's main source of ...